Nordic Components Benelli M1 / M2 /SBE Magazine Extensions

Part Number: NC-EXT-BN-12

Inventory Status: In Stock

Low Price: $79.99

Nordic Components Benelli M1 / M2 /SBE Magazine Extensions

Click to enlarge

Ask a question about
this product...

Product Information:

Nordic Components - extended magazine tubes for Benelli shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut adding a distinctive touch while also providing a quick and sure grip.

Currently available in +2, +3, +4, +5, +6, +7 and +8 shell configurations for the Benelli M1, M2, SBE and SBE2 shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

The chart below lists some important information about the Nordic Components tube extensions. The most important measurement is the "Overall Length Installed" . This gives the installed overall length of the tube and fixed tube assembly. If you have an 18 inch barrel, you probably would not select a +5 or greater tube extension, as the extension would stick out quite a bit further than the end of your barrel. With the Recommended Barrel Length options in relation to your barrel length, it should be apparent that some tubes will extend past the end of your barrel. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel.

# of Extra Shells	Tube Length	Overall Length Installed	Recommended Barrel Length
+2	6.250	15.375	18.5
+3	8.622	17.747	18.5
+4	10.393	19.518	18.5 / 21
+5	11.929	21.054	18.5 / 21
+6	14.370	23.495	21 / 24
+7	17.598	26.723	24 / 28
+8	20.196	29.321	28

Directions for selecting the proper tube extension length:

Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel. Otherwise, the extension which comes closest to the end of your barrel is the proper tube length to select.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Nordic Components Magazine Tube Extension and Separately Purchased Accessories

Nordic Components Magazine Tube Extension and Separately Purchased Accessories

Additional information on Nordic Components Shotgun Extension Tubes:

If you are not 100% satisfied with a new Nordic Components product, we'll refund your money! Obtain an RMA #, include a copy of your receipt, return the new unused item to us within 10 days from the date delivered and we will issue a refund.

Once you install a Nordic Components extension tube, it becomes a used product and used products are not eligible for refund, exchange, or return (threading the extension tube onto the fixed magazine tube constitutes installation).

There is sufficient information provided above describing the overall length of each extension tube for an informed purchase decision to be made. Please use the provided information to make absolutely sure that the correct length tube is selected. Once you receive this item and if it appears too long for your application, do not install it as that will void your ability to return the item.

Shipping charges are not refundable and we can not accept returns on special order items.

Returns of new items due to buyer decision are subject to 15% re-stocking fee.

Available Options:

Size:


	+2 Shells
	+3 Shells
	+4 Shells
	+5 Shells
	+7 Shells
	+8 Shells

Current Reviews: 2

Click for shipping rates

Qty:

Customers who bought this product also purchased:

Pearce Grip - Springfield XD Extensions and Base Pads, 9mm and 40 SW - $8.99

Springfield XD Sand Decal Grips - $8.99

BlackHawk CQC Serpa Holster, Matte Finish, Springfield XD, RH - $36.99

We also recommend:

Nordic Components Benelli / Beretta Shotgun Speed Bolt Handle - $23.99

Nordic Components 12 Gauge Shotgun Extension Tube Clamp - $30.99


	Join our email list:

- from NRA/ILA - Tactical Blog We accept credit cards, purchase orders, checks and money orders. Tactical Equipment by Manufacturer Tactical Gear by Category