Spend $150 and get FREE U.S. Shipping
JP ENTERPRISES AR-15 OVERSIZED ANTI-WALK PINS
JP ENTERPRISES AR-15 OVERSIZED ANTI-WALK PINS
Notice: While we make every attempt to provide current product information and images, manufacturers make frequent, unpublished changes to their products and specifications The images and descriptions that we provide are to be used as a guide in your purchasing process. Due to the many manufacturer product changes, we cannot guarantee that product information on our web store is the most current. If you are unfamiliar with a product, the information provided is a guide and should be verified by either contacting us with your questions or speaking with the manufacturer.

JP ENTERPRISES AR-15 OVERSIZED ANTI-WALK PINS

Write a Review
Your Price: $15.89
Retail Price:$16.99
You Save:$1.10(6%)
These JP Enterprises tool steel Oversize Anti-Walk Hammer and Trigger Pins work to remove the slop between the trigger, hammer and the receiver results in that extra bit of enhancement to get the maximum performance potential out of high-grade trigge
Part Number: JP-JPAW1
Availability: In Stock - 2

Weight : 0.01

Eligible for Economy Flat Rate Shipping
These JP Enterprises tool steel Oversize Anti-Walk Hammer and Trigger Pins work to remove the slop between the trigger, hammer and the receiver resulting in that extra bit of enhancement to get the maximum performance potential out of high-grade trigger parts. These Anti-Walk Pins feature Allen heads for easy tightening and are finished in black oxide. Trigger and hammer may have to be reamed for a perfect fit. No modifications to receivers are needed. They are the final upgrade for a refined fire control system. 

Available in .156 for small pin receivers, these tool steel trigger/hammer pins are black oxided for corrosion resistance and retained by custom buttonhead stainless retainer screws with thread locker on both ends. No modification to the lower receiver is needed, but be aware that the trigger and hammer may have to be reamed for a perfect fit with these parts, and a detail stripping of the lower receiver will be required in most cases. 

Warning: Some Colt AR type rifles have been manufactured with hammer and trigger pins and holes which are approximately .176" in diameter. These are referred to as "large pin" Colts. This was done to eliminate the chances of someone putting M16 fire control parts into an AR receiver. This is not found in all Colt models, just some. All other AR type rifle manufacturers have stayed with the .156" diameter hammer and trigger pins and holes, or "small pin" which is the same spec used in all military M16 rifles. Measure your pins or the holes in your lower receiver to determine if you have a "small" or "large" hole Colt® AR

Related Items

RISE LE145 TACTICAL TRIGGER
$139.99
In Stock

Recently Viewed Items

0 Items
TOP